| |
Model |
Description |
Retail Price |
Your Price |
 |
3000 |
Heavy Duty Battery Disconnect Switch |
$90.34 |
$67.75 |
|
| Heavy-Duty Battery Disconnect Switch, 600 Ampere Continuous Rating – 70% higher than standard switches. Accepts two 4/0 battery cables per terminal, luminous label for low light reading. Ignition protected - Safe for installation aboard gasoline powered boats. .870" (22.01mm) stud length to accept multiple cable terminals, 1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance.Meets all American Boat and Yacht Council (ABYC) requirements for battery switches.Tactile textures indicate knob position by feel only. Case design allows surface or rear panel mounting, fits all Perko and Guest low amperage battery switch hole patterns. |
|
 |
5026 |
Fuse Block w/Cover, ATO/ATC Style, 12 Circuit |
$58.14 |
$43.60 |
|
| Fuse Block w/cover ATO/ATC Style, 12 Circuit - #8-32 screw terminals, #10-32 negative bus stud, Clear insulating cover with label recess for small format labels, Cover insulates all conductive parts, satisfying ABYC/USCG requirements, Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit, Accepts ATO and ATC fast acting blade type fuses. Base Material Reinforced Polycarbonate and cover Material Clear Polycarbonate. ATO/ATC Fuses 1 to 40 Amperes Available, Maximum Amperage per circuit 30 Amperes, Maximum Amperage per block 100 Amperes. Maximum Voltage 32 Volts DC. |
|
 |
5034 |
ATO/ATC Fuse Block, 12 Circuit, without Cover |
$49.40 |
$37.93 |
|
| ATO/ATC 12 Circuit Fuse Block without Cover -#8-32 screw terminals, Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Accepts ATO and ATC fast acting blade type fuses.Base Material Reinforced Polycarbonate , ATO/ATC Fuses 1 to 40 Amperes Available, Maximum Amperage per circuit 30 Amperes, Maximum Amperage per block 100 Ampere, Maximum Voltage 32 Volts DC. |
|
 |
6006 |
“M” Series Mini Battery Switch |
$31.16 |
$23.38 |
|
| M Series Battery Switch. Continuous rating 300 amps and inrush rating 1500 amps DC, with a cranking rating 700 amps DC. Single circuit on/off with removable knob or key remains positively retained. 3/8" M10 tin plated copper studs, 7/8" long stud to accept multiple cable terminals. Ignition protected, safe for installation on gasoline boats and has front or rear panel mounting capability. Accepts up to 4/0 battery cables. All non corrosive marine grade metals, molded in durable reinforced polycarbonate. |
|
 |
7610 |
Automatic Charging Relay, 120 Amp |
$98.98 |
$74.24 |
|
| Automatically combines batteries during charging and isolates batteries when discharging and starting engines. Protects sensitive electronics by temporary isolation of house loads from engine dircuit during engine cranking.12/24 volt auto ranging voltage input, Hermetically sealed contacts/vaporproof. Waterproof rated IP67 - temporary immersion for thirty minutes. Ignition protected - safe for installation aboard gasoline powered boats. Remote LED output indicates relay state away from ACR, Supports high-output alternators up to 120 Amperes, Dual sensing. |
|
| |
7622 |
Battery ACR Relay (Battery Combiner) Manual |
$235.46 |
$176.60 |
|
| Battery ACR relay (Battery Combiner) by Blue Seas Systems, 2 bank design function, ML 500 amp, 12V w/manual control. |
|
 |
8025 |
DC Toggle Circuit Breaker Panel, 3 Position |
$145.78 |
$113.89 |
|
| DC Toggle Circuit Breaker Panel, 3 position panel, Voltage 12/24 Volt DC, Width 5.25" Height 3.75", Weight 1.12. All positive, negative and grounding buses installed, Fully prewired, Includes set of 30 common backlightable DC labels, Label backlighting pre- installed, All LEDs installed, Detailed installation instructions and cutout template included. Maximum panel amperage 100 amps. |
|
 |
8059 |
AC, 120V, 8 Position Circuit Panel |
$214.78 |
$167.80 |
|
AC 8 Position Panel, All hot, neutral and safety ground buses installed, fully pre-wired, Label backlighting pre-installed, Detailed installation instructions and cutout template, All LEDs installed, Maximum panel Amperage - 50 Amperes.
Specifications: Height: in (mm) 7.50 (190.50), Width: in (mm) 5.25 (133.35) ,Weight: 1.85 Lb (Kg) (0.84) Installed Single Pole Breakers: (5) 15A |
|
 |
8068 |
DC Toggle Circuit Breaker Panel, 13 Position |
$528.18 |
$412.64 |
|
| DC Toggle Circuit Breaker Panel, 13 position panel, 12 Volt DC, Width 10.5" Height 7.50", Weight 4.06, All positive, negative and grounding buses installed, Fully prewired, Includes set of 30 common backlightable DC labels, Label backlighting pre-installed, All LEDs installed, Detailed installation instructions and cutout template included, Maximum panel amperage 100 amps. |
|
 |
8080 |
Bank Battery Switch Panel with DC Main Breaker |
$208.06 |
$162.55 |
|
Keeps batteries isolated and provide DC main circuit protection, Isolates starting circuit from house circuit, Simplifies battery switch operation, Protects electronics from sags and spikes caused by engine cranking. Discharges batteries independently enables a failed starting battery to be isolated from the electrical system and both house and starting loads to be operated from the remaining battery bank. Provides main circuit protection for DC house power system, Addition of the new Automatic Charging Relay automates charging both battery banks
Specifications
Inrush Rating: 0.25 sec (10 repeats) 1,400 Amps DC, Cranking Rating: 9.75 sec (10 repeats) 600 Amps DC, Intermittent Rating: 5 min (UL 1107) 375 Amps DC, Continuous Rating: (UL 1107) 250 Amps DC, Voltage Rating: 32 Volts DC Maximum, House Circuit Protection: 100 Amps DC, Dimensions: Height 6.50" Width 5.25" |
|
 |
8096 |
DC Toggle Circuit Breaker Panel, 6 Position |
$247.24 |
$193.16 |
|
| DC Toggle Circuit Breaker Panel, 6 position panel, 12/24 Volt DC, Width 10.5" Height 3.75",Weight 2.20, All positive, negative and grounding buses installed, Fully prewired, Includes set of 30 common backlightable DC labels, Label backlighting pre-installed, All LEDs installed, Detailed installation instructions and cutout template included, Maximum panel amperage 100 amps. |
|
 |
8247 |
AC Digital Multimeter w/Alarm |
$314.48 |
$235.86 |
|
| AC Digital Multimeter w/alarm by Blue Sea Systems.Displays amperage from 1 to 50 amps, displays voltage from 70 to 300 volts, displays power to 45 kilowatts Displays frequency from 40 to 90 HZ. User settable high amperage w/audio and visual alarm and 3 brightness display levels – all with a splash proof front. 9/16” display character size, with power consumption of only .010 to 0.27 watt. |
|
 |
8248 |
AC Digital Multimeter w/Alarm |
$285.64 |
$214.23 |
|
| AC Digital Multimeter w/alarm by Blue Sea Systems. Displays amperage from -500 to +500 amps and has 3 brightness display levels. User settable high and low voltage audio and visual alarms, all with a splash-proof front. Includes 500 amp shunt. 9/16” display character size with a power consumption of .60 to 1 watt. |
|
 |
8265 |
A Series Circuit Breaker Panel, 24 Position |
$655.50 |
$512.11 |
|
| A Series Circuit Breaker Panel, 24 Positon panel, All hot neutral and safety ground buses installed fully pre-wired . All circuit label positions are backlit on standard panels no kit required, On indicating LEDs installed in all circuit positions, MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance, Two-part polyurethane slate gray finish, Heavy 1/8" aluminum 5052 alloy, Width 14.75", Height 7.50". |
|
 |
8280 |
2 Bank Parallel Battery Switch Panel |
$224.80 |
$175.63 |
|
Designed for twin outboard installations keeping two starting batteries and a house battery isolated, Either starting battery, or both, can be used to start either engine and provides DC Main circuit protection for the house circuit, Ignition protected, Isolates starting circuit from house circuit, Simplifies battery switch operation, Protects electronics from sags and spikes caused by engine cranking, Discharges batteries independently, Enables a failed house or starting battery bank to be isolated from the electrical system and both house and starting loads to be operated from the remaining battery bank, Addition of the new Automatic Charging Relay automates charging both battery banks
Specifications:
Inrush Rating: 0.25 sec (10 repeats) 1,400 Amps DC, Intermittent Rating: 5 min (UL 1107) 375 Amps DC, Continuous Rating: (UL 1107) 250 Amps DC, Voltage Rating: 32 Volts DC Maximum, House Circuit Protection: 100 Amps DC, Dimensions: Height 7.50" Width 6.25" |
|
 |
8478 |
AC 120V Circuit Breaker Panel, 10 Position |
$380.04 |
$296.91 |
|
| AC Circuit Breaker Panel, 10 position panel, All hot, neutral and safety ground buses installed, fully pre-wired, Label backlighting pre-installed, All LEDs installed, 9353, 0- 150 Volt AC Voltmeter, Detailed installation instructions and cutout template, Maximum panel Amperage - 100 Amperes. Specifications: Height: in 11.25 (285.75), Width: in (mm) 5.25 (133.35) ,Weight: Lb (Kg) 3.00 (1.36) ,Installed Single Pole Breakers: (7) 15A. |
|
 |
9012 |
Electronic Solenoid Switch |
$216.98 |
$162.74 |
|
| Electronic Solenoid Switch, Functions as a remote battery switch, Activated by an ON- OFF switch mounted anywhere. Used as a manual battery paralleling switch, Contacts hermetically sealed, Vaporproof/Ignition protected. Pulse circuit requires very low current draw when contact is closed. UL Recognized - UL 508 Industrial Control Equipment. Meets SAE J1171 - External ignition protection requirements. Coil Circuit: Input Voltage 9-36 Volts DC Maximum, Power Consumption: inrush max, 130ms 3.80 Amperes @ 12-36 Volts DC, holding 0.13 Amperes @ 12 Volts DC 0.07 Amperes @ 24 Volts DC, Main Power Contacts: Voltage Rating 60 Volts DC, Stud Terminal Size M8 (accepts 5/16" terminals, Contact Form SPST-NO, Inrush Rating: 0.25 sec (10 repeats) 2,000 Amperes DC, Cranking Rating: 9.75 sec (10 repeats) 500 Amperes DC, Intermittent Rating: 9.75 sec (10 repeats) 275 Amperes DC, Continuous Rating: (UL 1107) 250 Amperes DC, Mechanical Life 1 Million Cycles. |
|
 |
9003E |
Battery Disconnect Switch |
$46.14 |
$34.60 |
|
| Battery Disconnect Switch, Vaporproof/Ignition protected, with luminous label for low light readability. Max Voltage 32 volts DC with continuous Rating 300 Amps DC and an intermittent Rating 400 Amps DC. Cranking Rating 550 Amps DC. Stud Terminal Size is 3/8”. |
|
 |
AFB200 |
200 Amp ANL Fuse and Holder |
$52.96 |
$36.55 |
|
| 200 Amp ANL fuse and holder. Ideally positioned between your energy source (batteries) and your inverter. (about 18-20 inches from batteries). |
|
 |
AFB400 |
Fuse & Holder, 400 AMP ANL |
$55.92 |
$41.94 |
|
| Fuse and Holder, 400 Amp capacity, ANL by Blue Seas |
|
